- 12" x 18" Laserable Leatherette With Adhesive
- Cleaning Instructions: Clean residue after lasering with LA Awesome or any neutral cleaner. Wipe with a damp cloth to remove spots, alcohol works well on pen marks.
- Length: 12", Height: 18", Thickness: 3/64"
- Single Sided: Yes
- Cuts with Laser: Yes
- Cuts with Scissors: Yes
Laseral Leatherette Sheet Stock with Adhesive opens up a world of options for creativity! It can be laser cut the size and shape you need, and laser engraved, and the adhesive backing allows uou to adhere it to hats, bags, etc. using heat application. Available in 15 beautiful colors to chose from.
RECOMMENDED LASER RASTER SETTINGS:
35 watt DPI 600 Speed 90% Power 35%
60 watt DPI 600 Speed 100% Power 30%
80 watt TROTEC PPI 600 Speed 90% Power 74%
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the Brand watt and model
HEAT SETTINGSTO APPLY
Temperature: 270 degrees
Pressure: medium
Time: 10-12 seconds
TIPS FOR BEST RESULTS
1. Focus right on the leatherette
2. Cleaning should not be necessary with leatherette products. However
if it is use a small amount of LA Awesome (part number = AWE32) on
a microfiber towel.
3. Confirm the position of your artwork by testing on a separate piece
of leatherette or tape a clear piece of plastic onto the item.
4. Vector cut mask or plastic for placement guides
RECOMMENDATIONS FOR HEAT TRANSFER MATERIAL
When personalizing a Leatherette item with Heat Transfer Material
Weed: Reverse
Temperature: 240 Degrees Fahrenheit
Pressure: Medium
Time: 4 Seconds
Peel: Hot
LASER VECTOR CUTTING SETTINGS:
35 watt: Speed 20% Power 35% 50Hz
60 watt: Speed 25% Power 25% 100Hz
120 watt: Speed 85% Power 35% 2000Hz
80 watt(Trotec): Speed 65% Power 40% 2000 PPI
